[. . . ] Ether Engine 100-AE Installation Hardware Installation: To insert the network adapter into PC, follow the steps bellow: 1. [. . . ] Key in the IP address for DNS server and click Add Screen 4: At the last, go to the Gateway. Make sure click the Ok button at the bottom when you finish configuration. Remarks: 1. Make sure the IP address you assign to the PCI card is under the same subnet with the gateway. For example, if your subnet is "255. 255. 255. 0", that means all the first three number of your IP setting should be the same. On the other hand, if your subnet is "255. 255. 0. 0", your IP could assign like "192. 168. X. X". If your networking has a DHCP server, you don't have to assign a static IP. [. . . ] At the last, make sure click the Ok button at the bottom, when finish the entire configuration. [. . . ]